MSDS 2091001

MATERIAL SAFETY DATA SHEET

Photovolt Instruments Inc.

6323 Cambridge St

Minneapolis, MN 55416

Phone: (800) 222-5711

EMERGENCY & MSDS CONTACT

3E Company

(800) 451-8346

(619) 677-0150

SECTION 1 - IDENTIFICATION

Product Name: Sealing Grease

Product Number: 20-910-01 Synonyms: Apiezon M Grease

Chemical Family: Mineral Oil CAS#: 68335-36-4

SECTION 2 - INGREDIENTS

 

Hazardous Ingredients: None

Pursuant to OSHA’s Hazardous Communications Standard 29 CFR 1910.1200, this item is not considered to contain hazardous materials. Chemical ingredients are listed if they: (1) are hazardous as defined in the OSHA Hazard Communication Standard, 29 CFR 1910.1200, (2) are present in concentrations of 1% or greater (0.1% or greater if carcinogenic), or (3) present a physical hazard.

SECTION 3 - PHYSICAL DATA

Appearance:

Pale amber grease

Odor:

Odorless

 

Vapor Pressure @ 20º C:

2 x 10-9 torr

  

Specific Gravity @ 20º C:

0.894

Melting Point:

 

44º C

Solubility in Water:

Insoluble

No other data is available.

SECTION 4 - FIRE AND EXPLOSION HAZARD DATA

Flash Point: >200º C
This material is not considered to present a fire or explosion hazard.

SECTION 5 - HEALTH DATA

This material is not considered to present a health hazard when handled as directed.

SECTION 6 - REACTIVITY

Incompatibility: None determined

Hazardous Decomposition Products: None determined

Stability: Stable under ordinary conditions of use and storage.

Hazardous Polymerization: Will not occur

SECTION 7 – ENVIRONMENTAL INFORMATION

Spill and Leak Procedures: Spills should be wiped up or absorbed with sand, earth, or sawdust.

Waste Disposal: Dispose in accordance with local, state, and federal environmental regulations for mineral oils.

 

SECTION 8 – PROTECTION INFORMATION

No special control measures are required beyond good laboratory practices.

SECTION 9 – SPECIAL PRECAUTIONS

Handling and Storage: Store at room temperature.

SECTION 10 – COMMENTS

Employers should use this information only as a supplement to other information gathered by them, and should make independent judgement of suitability of this information to ensure proper use and protect the health and safety of employees. This information is furnished without warranty, and any use of this product not in conformance with this Material Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
DATE: 1/28/08
PREPARED BY: JHN

 


BACK TO MAIN INDEX

   Photovolt Instruments Inc.                            email: sales@photovolt.com
   PHONE: 1-952-848-2000                                                FAX 1-952-926-5498

© 2000 Photovolt Instruments Inc.